Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of NORYL PPX™ Resin PPX7115 - Europe - (PPE+PP) - Saudi Basic Industries Corporation (SABIC)

Check here, which other Noryl PPX datasheets, application examples or technical articles are available in Material Data Center

Processing/Physical Characteristics - Mechanical properties - Thermal properties - Other properties - Processing Recommendation Injection Molding - Diagrams

Any use of this information falls under the rules of our disclaimer.

Product Texts

NORYL PPX™ 7115 resin is a non-reinforced alloy of polyphenylene ether (PPE) + polypropylene (PP). This injection moldable grade exhibits high modulus, high-temperature performance, excellent melt strength, impact resistance, hydrolytic and dimensional stability. NORYL PPX7115 resin is an excellent candidate for applications requiring high modulus and chemical resistance.

Processing/Physical Characteristics	Value	Unit	Test Standard
ISO Data
Melt volume-flow rate, MVR	12	cm³/10min	ISO 1133
Temperature	260	°C	-
Load	5	kg	-
Thermal conductivity of melt	0.21	W/(m K)	-
Spec. heat capacity of melt	2300	J/(kg K)	-
Ejection temperature	142	°C	-

Mechanical properties	Value	Unit	Test Standard
ISO Data
Tensile Modulus	1370	MPa	ISO 527
Yield stress	35	MPa	ISO 527
Yield strain	5	%	ISO 527
Stress at break	31	MPa	ISO 527
Strain at break	50	%	ISO 527
Flexural modulus	1520	MPa	ISO 178
Charpy impact strength, +23°C	N	kJ/m²	ISO 179/1eU
Charpy impact strength, -30°C	N	kJ/m²	ISO 179/1eU
Charpy notched impact strength, +23°C	37	kJ/m²	ISO 179/1eA
Charpy notched impact strength, -30°C	6	kJ/m²	ISO 179/1eA
Izod impact strength, +23°C, 4mm	N	kJ/m²	ISO 180/1U
Izod impact strength, -30°C, 4mm	N	kJ/m²	ISO 180/1U
Izod notched impact strength, +23°C, 4mm	36	kJ/m²	ISO 180/1A
Izod notched impact strength, -30°C, 4mm	10	kJ/m²	ISO 180/1A
Rockwell hardness	R 60	-	ISO 2039-2

Thermal properties	Value	Unit	Test Standard
ISO Data
Vicat softening temperature, B	80	°C	ISO 306
Vicat softening temperature, 120°C/h 50N	85	°C	ISO 306
Coeff. of linear therm. expansion, parallel	70.7	E-6/K	ISO 11359-1/-2
Coeff. of linear therm. expansion, normal	101	E-6/K	ISO 11359-1/-2

Other properties	Value	Unit	Test Standard
Density	990	kg/m³	ISO 1183

Processing Recommendation Injection Molding	Value	Unit	Test Standard
Pre-drying - Temperature	60 - 65	°C	-
Pre-drying - Time	2 - 4	h	-
Processing humidity	≤0.02	%	-
Melt temperature	260 - 290	°C	-
Mold temperature	40 - 60	°C	-
Feed temperature	60 - 80	°C	-
Zone 1	225 - 275	°C	-
Zone 2	240 - 285	°C	-
Zone 3	250 - 290	°C	-

Diagrams

Characteristics

Processing

Injection Molding

Regional Availability

Europe

Disclaimer

Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.

Created: Source: www.materialdatacenter.com

Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.